Alkaline Electrolyzers
E-1000 · E-1200 · E-2000 — 3–2000 Nm³/h production, 4.3–4.6 kWh/Nm³, ≥99.999% purity after purification.
Request A Quote →
Hydrogen Energy Equipment — Production & Refueling
3 – 2000 Nm³/hHydrogen production capacity
≥ 99.999 %Purity after purification
4.3 – 4.6 kWh/Nm³DC power consumption
2000 kg/dayRefueling capacity of integrated station
A complete green-hydrogen chain — alkaline water electrolysis, hydrogen compression and dispensing, and integrated refueling stations from pilot to commercial scale.
Get A QuoteOverview
SANY hydrogen energy equipment covers the green-hydrogen value chain: alkaline water electrolysis for production, compression and dispensing hardware for refueling, and integrated hydrogen refueling stations. Production units scale from small skid-mounted pilots (V-200, V-500) to commercial electrolyzers (E-1000, E-1200, E-2000) delivering up to 2000 Nm³/h of hydrogen at 99.999% purity.
The hardware is built to couple with renewable power from wind and photovoltaic generation, producing low-carbon hydrogen for heavy-duty transport, industrial processes and energy storage. DC consumption runs from 4.2 kWh/Nm³, and factory-assembled skids cut civil works and on-site commissioning time for fast deployment of demonstration and commercial stations.
Integrated stations combine production (200–2000 Nm³/h), storage (580–1000 kg) and refueling (500–2000 kg/day) as one package. Typical uses are fuel-cell bus and truck refueling, industrial hydrogen for refining and chemicals, and renewable-power buffering. Projects are delivered with application engineering and after-sales support through SANY's global service network across 180+ countries.
SANY hydrogen energy equipment covers the green-hydrogen value chain: alkaline water electrolysis for production, compression and dispensing hardware for refueling, and integrated hydrogen refueling stations. Production units scale from small skid-mounted pilots (V-200, V-500) to commercial electrolyzers (E-1000, E-1200, E-2000) delivering up to 2000 Nm³/h of hydrogen at 99.999% purity.
The hardware is built to couple with renewable power from wind and photovoltaic generation, producing low-carbon hydrogen for heavy-duty transport, industrial processes and energy storage. DC consumption runs from 4.2 kWh/Nm³, and factory-assembled skids cut civil works and on-site commissioning time for fast deployment of demonstration and commercial stations.
Integrated stations combine production (200–2000 Nm³/h), storage (580–1000 kg) and refueling (500–2000 kg/day) as one package. Typical uses are fuel-cell bus and truck refueling, industrial hydrogen for refining and chemicals, and renewable-power buffering. Projects are delivered with application engineering and after-sales support through SANY's global service network across 180+ countries.
Product Families
Skid-mounted AWE Units
V-200 · V-500 — 200–500 Nm³/h, 4.2–4.5 kWh/Nm³, factory-assembled skids for rapid site setup.
Request A Quote →
Refueling Equipment
Hydraulic compressor, compressor skid, hydrogen dispenser, sequence control panel and hydrogen discharge column.
Request A Quote →
Integrated Refueling Stations
Production 200–2000 Nm³/h, refueling 500–2000 kg/day, storage 580–1000 kg — including the integrated 2000 kg station.
Request A Quote →Key Advantages
High Purity
Electrolysis output purified to ≥99.999% — fuel-cell grade hydrogen ready for end use.
Energy Efficient
DC consumption from 4.2 kWh/Nm³, reducing the power cost that dominates green hydrogen economics.
Skid-mounted Build
Factory-assembled skids cut civil works and on-site commissioning time for fast deployment.
One-chain Supply
Production, compression, storage and dispensing delivered as an integrated station package.
Technical Parameters
Representative specifications for the electrolysis and refueling range. Full data sheets are available on request.
| Alkaline Electrolyzers — Models | E-1000, E-1200, E-2000 |
| Production Capacity | 3–2000 Nm³/h |
| DC Power Consumption | 4.3–4.6 kWh/Nm³ |
| Hydrogen Purity (after purification) | ≥ 99.999% |
| Skid-mounted AWE — Models | V-200, V-500 |
| Skid Unit Capacity | 200–500 Nm³/h |
| Skid Unit DC Consumption | 4.2–4.5 kWh/Nm³ |
| Refueling Equipment Components | Hydraulic compressor, compressor skid, dispenser, sequence control panel, discharge column |
| Integrated Station — Production | 200–2000 Nm³/h |
| Integrated Station — Refueling Capacity | 500–2000 kg/day |
| Integrated Station — Storage | 580–1000 kg |
| Reference Station | Integrated 2000 kg hydrogen refueling station |
Parameters are indicative and vary by configuration, site conditions and applicable safety standard.
Customisation & Applications
Systems are sized to project scale — from skid-mounted pilots for demonstration to commercial stations producing 2000 Nm³/h. Electrolyzers can be paired with wind or photovoltaic generation and battery storage to run on renewable power, while station layout, storage volume and dispensing pressure are matched to the target vehicle fleet.
Typical applications include hydrogen refueling for fuel-cell commercial vehicles and buses, industrial hydrogen supply for refining and chemicals, and renewable-energy buffering where surplus power is converted to hydrogen for storage or off-take.
Brochures & Documents
Hydrogen Energy Equipment Brochure (PDF)
Full product brochure with model-by-model specifications and station configurations.
Go to Downloads →